Introduction
The WXM05 wireless microphone is a specialized microphone headset designed for various applications. This guide provides a comprehensive overview of its usage and troubleshooting tips.
Compatibility and Setup
Compatibility: The WXM05 is only compatible with devices that have a Mic Jack. It does not support Aux/Line in Jacks and is not compatible with Bluetooth speakers or Macbooks. It's important to note that the WXM05 is a microphone for voice input and does not have an auditory function or built-in speaker.
How to Use: To start using the WXM05, turn on both the transmitter and receiver. The blue light on the devices will flash for approximately 2 seconds, indicating they are trying to pair. Once the indicator light stops flashing, it signifies a successful match, and you can start using the microphone without any further setup.
Battery Life and Charging
The WXM05 comes with a 450mAh rechargeable lithium-ion battery. Both the transmitter and receiver can be charged simultaneously using the provided dual USB V2.0 cable.
A full charge takes about 2.5 hours, and the upgraded battery provides up to 6 hours of working time.
Troubleshooting
No Sound or Not Working:
Ensure the power is on and check the battery indicators. If the batteries are low, charge them.
Verify that your device is compatible with the WXM05 (remember, it does not work with AUX/Line in jack, Bluetooth speakers, laptops, or Macbooks).
For further assistance, feel free to contact customer support.
Pairing Issues:
If the blue lights keep flashing, it indicates unsuccessful pairing. To re-pair, first turn off both the transmitter and receiver.
Turn on the transmitter and simultaneously long-press the "volume+" and "volume-" buttons for 5 seconds until the indicator light starts flashing blue.
Turn on the receiver and wait for approximately 5 seconds for automatic pairing.
Successful pairing is indicated when the flashing of the lights on both the transmitter and receiver stops.
Using Multiple Sets Simultaneously
If you're using multiple WXM05 headsets at the same time, you need to adjust the frequency to avoid interference. Long press the volume "-" button for 5 seconds on each headset to switch the frequency randomly.
The WXM05 supports up to 15 sets operating concurrently in the same area.
Conclusion
The WXM05 wireless microphone offers convenience and flexibility for various uses. By following these instructions and troubleshooting tips, you can optimize your experience with this device. For any further queries or assistance, don’t hesitate to reach out to customer support.
